||Hardware: Converter mode is determined by 4-position switch settings.
Software: Converter mode is determined by most recently saved on-board microprocessor settings.
||1st) Auto-Negotiation (UP = enabled): Allows detection of, and adaptation to, full-duplex or half-duplex mode in device attached to copper link.
2nd) Link Pass Through (UP = enabled): Allows a fault EITHER on the copper OR on the fiber side of the media converter to stop signal and data transmission on the other side.
3rd) AutoCross™ (UP = enabled): Allows straight-through twisted pair cable to be used for crossover connections.
4th) Not Used
||Power: Indicates that DC power is connected
TX (Link Copper): ON indicates TP link; Blinking indicates TP receive;
FX (Link Fiber): ON indicates fiber link; Blinking indicates Fiber receive
||Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
||See chassis specifications
||CE Mark, FCC Class A; CISPR Class A