Product information:

The AP-GET-SFP-01 is a 10/100/10000 Ethernet media converters that provides cost effective, entrylevel media conversion between 10/100/1000Base-T ports and 100/1000Base-X fiber ports. Designed as an embedded solution that can be mounted internally in Tempest rated computer and networking equipment such as VoIP Phones, Workstations, Thin Clients, Printers, Monitors and similar devices.  Government agencies like Intelligence, Defense, and Foreign Affairs generally require fiber connectivity to these devices to aid in data security as well as mitigating electro-magnetic emissions.  The converter should be positioned such that the copper connection is internal to the device it is mounted within, while the fiber is the only port accessible externally.  With its fixed configuration, deployments are plugand-play and the hot-swappable dual speed SFP port supports autosensing 100M or 1000M SFP transceivers. Transition Networks offers a wide variety of SFP optical transceivers to meet specific deployment environments supporting either multimode or single mode fiber.   The Copper port and power input share a connection through a 10-Pin interface by PH Connector.  The first 8 pins provide the 10/100/1000 Ethernet connection, while the last 2 pins provide the internal power connection.  This converter is an ideal solution for fiber integration in both Fast Ethernet and Gigabit Ethernet environments, along with its small size; it is perfect for locations where space is limited.

Features

• 10/100/1000Base-T on the copper port
• Fiber 100/100Basae-X open SFP slot
• Supports Power Level III (2W) SFP modules
• Auto-Negotiation enabled
• Auto-sensing 100/1000 SFP port speed
• AutoCross enabled
• Active Link Pass Through (ALPT) enabled
• Automatic Link Restoration
• Support for Jumbo Frames up to 10,240 bytes
• Power input range from 3.3 to 5 VDC
• PCB board assembly only, metal enclosure not provided
• 10-pin #B10B-PH-K-S PH Connector by JST used for UTP and power connections (customer will need to provide a cable with the corresponding connector, #PHR-10)
• One internal copper port status LED
• One external fiber port status LED
• Two PCB mounting holes

Individual embedded projects may vary, below is a list of features that could be customized to meet a projects unique requirement (contact your BetterBox representative for more information)

• PCB Board Sze
• Mounting hole locations
• Power input voltage
• Power input connector
• Status LED location
• Ethernet copper port connector
• Fiber port connector

Specifications