Fiber Optic Connector Specs |
Single Mode |
Min TX PWR: -15.0 dBm Max TX PWR: -8.0 dBm RX Sensitivity: -31.0 dBm Max In PWR: -8.0 dBm Link Budget: 16.00 dB |
Standards |
Ethernet interface: IEEE 802.3™-2008
TDM interfaces: ANSI T1.102, T1.403 and T1.408 ITU I.431, G.703,G.736, G.775 and G.823 ETSI 300-166, 300-233 and TBR 12/13 AT&T Pub 62411 |
Switches |
Numerous switch settings for line coding, line buildout, loopback (per port), AIS setting, Ethernet port settings: Auto-Negotiation, Force speed/duplex and enable Transparent Link Pass Through |
Jumper |
Hardware: mode is determined by DIP switch settings Software: mode is controlled by the most recently saved, on-board microprocessor setting |
Dimensions |
Width: 1.72” [44 mm] Depth: 5.0” [127 mm] Height: 3.4” [86 mm] |
Environment |
See chassis specifications |
Regulatory Compliance |
EN55022 Class A, EN55024, CE mark |