CopperLink
Ethernet Extender for 10/100 networks |
| Need
to extend your LAN? Get premium performance
over your existing voice-grade
telephone wire eliminating the cost of installing
new LAN grade cable or expensive fire. |
|
•
High-speed
full-duplex 12.5 Mbps communications link
•
Extends
Ethernet connections up to 4,500 ft. (1,372
m)
•
Easy
2-wire CopperLink connection via built-in
RJ-45 or 2-position terminal
block
•
Passes
higher layer protocols and supports 802.1Q
(VLAN tagging)
•
Automatic
learning and aging address table
•
Five
LEDs monitor power, CopperLink link and status,
Ethernet link and activity
•
Auto-sensing
10 or 100Base-T and full or half-duplex Ethernet
operation
•
No
configuration required |
|
| |
|
|
|
|
Our
CopperLink Ethernet Extender offers one of the most efficient,
reliable, and cost-effective solutions for connecting peered
10/100Base-T Ethernet LANs; reaching remote PCs and equipment;
or delivering last-mile ISP services—all at 12.5 Mbps!
The Model 2158 offers premium performance over your existing
voice-grade telephone wire, eliminating the cost of installing
new LAN grade cable or expensive fibre. CopperLink Ethernet
Extenders are compact, easy to install, and transparent to higher
layer protocols. Simply connect the network equipment to the
shielded Ethernet RJ-45F jack, the twisted-pair telephone wire
to the CopperLink RJ-45F jack or terminal block, the external
power supplies to the units and an appropriate power source,
and you’re ready to operate. The CopperLink Ethernet Extenders
will auto-sense and configure for 10Base-T or 100Base-T as well
as full or half-duplex Ethernet operation. No configuration
is required! Whether you are looking to make your network connections
go farther and faster, increase the efficiency of your existing
wiring infrastructure, or just simply extending your LAN, the
CopperLink Ethernet Extender is one of the most simple and cost
effective solutions around! |
| |
| Specifications |
| CopperLink
Interface |
RJ-45
(pin 4=TIP; pin 5=RING) and two-position terminal block (supports
19–26 AWG) |
| Ethernet
Interface |
8-position
shielded RJ-45 Auto-sensing 10/100Base-T with half or full-duplex
operation |
| Protocol
|
Transparent
to high layer protocols Supports 802.1Q VLAN tagging |
| Transmission
|
CopperLink
line rate: 12.5 Mbps |
| Data rate |
10
Mbps full-duplex |
| Surge Suppression |
CopperLink
maximum current surge: 20kA (8/20_s) gas tube |
| Front Panel Indicators |
Power,
CopperLink Link and Error, Ethernet Link and Activity status |
| External Power Supply Options |
AC: 120 VAC and Universal Power Supply (100–240 VAC) |
| DC:
-48 VDC, -24 VDC, and -12 VDC (optional upon request) |
| Compliance |
FCC
Part 15 Class A; EMC Directive 89/336/EEC, Low |
| Voltage
Directive |
73/23/EEC;
CE Mark |
| Temperature
|
32
to 122°F (0 to 50°C) |
| Altitude |
0–15,000
ft (4,572 m) |
| Humidity |
Up
to 90% non-condensing |
| Dimensions |
Standalone:
3.81H x10.5W x 9.53Dcm
Rack card: 7.6 H x 2.1 W x 19.9 Dcm
|
| Weight |
Standalone:
0.18 kg without power supply Rack card: 0.14 kg |
|
|
Order Code |
Description |
| 2158EXTLR |
2158
Extender Local & Remote Set |
| 2158EXTL |
2158
Extender Local End Only |
| 2158EXTR |
2158
Extender Remote End Only |
|
| BetterBox
Communications & Network Services
43 Burners Lane South
Kiln Farm, Milton Keynes
MK11 3HA
Ph: (++44) 01908 560200
Fx: (++44) 01908 565533 |
©
Copyright 2003 BetterBox
|
